LTE7240-M403,EU region,b1/3/5/7/8/20/38/40/41,WCDMA B1/5/8,GSM B3/8

Popis produktu:

LTE7240-M403,EU region,b1/3/5/7/8/20/38/40/41,WCDMA B1/5/8,GSM B3/8

The Zyxel LTE7240-M403 4G LTE Outdoor Router comes with what the critical feature, “the second WAN”, needs – flexible routing mode with both bridge and router functions, high-gain antenna for better signal and performance as well as robust IP56 outdoor hardware designed for harsh environments.

As mobile devices such as smart phones and tablets consume more wireless broadband, the crowded bandwidths have become a big issue to operators. Mobile broadband is a better solution than fixed-line broadband for its lower investment and faster deployment. However, since fixed lines have been the major broadband infrastructure in most places of the world for a long time, people are already using fixed lines for broadband Internet connection in most cases. Migrating from fixed lines to mobile broadband may need extensive evaluation, however adding mobile broadband as a backup for better performance or stability could be an easier decision.

The Zyxel LTE7240-M403 4G LTE Outdoor Router comes with what the critical feature, “the second WAN”, needs – flexible routing mode with both bridge and router functions, high-gain antenna for better signal and performance as well as robust IP56 outdoor hardware designed for harsh environments. No matter you have a router device or not, the LTE7240-M403 can be easily deployed and integrated into your existing environment. You can set LTE as your main connection or use LTE as a backup when performance of the main connection drops. The LTE7240-M403 is good for any venue like suburban areas, public locations, homes and offices. Enjoy LTE technology with minimum effort with the LTE7240-M403.

Embedded bridge/router mode adapts to all kinds of devices/gateways
For better network integration, Zyxel embeds both bridge and router modes into the LTE7240-M403. While users can take advantage of the built-in routing functions in all typical applications, the bridge mode is designed to work with users’ existing or preferred devices such as high-end Wi-Fi Access Points, Small Business Gateways or Enterprise Gateways. With the two built-in modes, the LTE7240-M403 can be easily integrated with all kinds of devices/gateways.

Built-In multi-band antenna
Zyxel’s LTE7240-M403 4G LTE Outdoor Router provides multi-band embedded antennas of up to 7 dBi that work effectively in outdoor environments. The outdoor-friendly design makes it possible to work in near non-line-of-sight conditions where desirable signal strength was difficult to achieve.

Non-stop connectivity with LTE 2nd WAN for fail-over
Multi-WAN fail-over relieves the risk of network outage caused by dependence on single-WAN technology. Even better, LTE is wireless so you can get the second WAN without an additional cabling plan. As long as the gateway supports “multi-WAN fail-over”, you can just connect the Zyxel LTE7240-M403 to the existing gateway and set LTE as the fail-over WAN.

Software upgrades over-the-air
Through the LTE radio interface, the Zyxel LTE7240-M403 supports TR-069 has full over-the-air configuration and software upgrade capability through events triggered by the operators.

System Specifications
IP Networking

Support IPv4/IPv6 dual stack (NDP IPv6)
DHCP server
ICMP supported
Virtual Private Network (VPN) pass through
Support NAT/NAPT/NAT disabling
Support DMZ
Support port forwarding/triggering
Support ALG
Routing

Support Bridge/Router mode
Support Dynamic DNS for first APN
Static/dynamic route setting for RIP v1/v2
Support Remote Management under Bridge Mode
Address Resolution Protocol
IP Firewall

Firewall can be enabled or disabled via GUI
DoS Attack Prevention
Support SPI
Application-Level Firewall
Filters LAN MAC address
Filters LAN IP address
Filters URLs
Management

Support Local/Remote device management and firmware upgrade via TR-069 and Web GUI
SMS management
APN management
PIN/PUK management
Network selection
Network preference
Operating frequency band selection
CLI/SSH (Local and remote SSH access)
Support UPNP IGD
Support SSH with key access
Support Bandwidth/Quota management
Support Web server API to support APPs

Hardware Specifications
LTE Interface

Standard compliant: 3GPP UE Category 4
Supported frequency: Band 1/3/5/7/8/20/38/40/41
FDD LTE peak data rate:
150 Mbps DL within 20 MHz bandwidth
50 Mbps UL within 20 MHz bandwidth
TDD LTE peak data rate:
112 Mbps DL within 20 MHz bandwidth
10 Mbps UL within 20 MHz bandwidth
UMTS/EDGE/GPRS/GSM Air Interface

Standard compliant: WCDMA Rel’99 and Rel’10 DC-HSPA+; GSM/GPRS/EGPRS Rel’99
Supported frequency:
UMTS band 1/5/8
EDGE/GPRS/GSM band 3/8
DC-HSPA+ downlink data rate up to 42 Mbps
HSUPA uplink data rate up to 5.76 Mbps
UMTS data rate up to 384 kbps
EDGE data rate up to 236.8 kbps
GPRS data rate up to 85.6 kbps
LTE/UMTS/GPRS Antennas

2 embedded antennas of up to 7 dBi
Power Specifications

Passive power over Ethernet
Power consumption at jack: < 10W
WiFi AP Features

802.11 n/g/b, 2.4 GHz, N300
Hidden SSID
MAC Address Filtering
For local management purpose only
Hardware Interface

One 10/100/1000 Mbps Ethernet RJ-45 LAN port
LEDs:
Power & signal and quality
Internet status/SMS
WiFi status
LAN status
One 3FF format mini SIM card slot
One WLAN button
One reset to default button
Power Consumption

15V/1A Power over Ethernet (PoE)

Physical Specifications
Dimensions (WxDxH): 140 x 60 x 200 mm (5.51" x 2.36" x 7.87")
Weight: 800g (1.76 lb.)

Environmental Specifications
Ingress Protection Rating

IP56 enclosures
Operating Environment

Temperature: -20°C to 60°C (-4°F to 140°F)
Humidity: 5% to 95% (Non-condensing)
Storage Environment

Temperature: -30°C to 70°C (-22°F to 158°F)
Humidity: 5% to 95% (Non-condensing)

Certification
CE/Safety

Stránky o produkte:

https://www.zyxel.com/cz/cs/products_services/4G-LTE-A-Outdoor-Router-LTE7460-M608/